Prevention of low profile ceiling fan

Alertness!

  1. Read whole directions previously starting establishment.
  2. To stay away from conceivable electrical stun, be sure power is closed off at principle board before wiring.
  3. All wiring must be as per national and neighborhood electrical codes. In the event that you are new to wiring, you should utilize a qualified circuit repairman.
  4. To lessen the danger of individual damage, introduce the fan just to the building structure as per these directions, and utilize just the equipment provided.

Exemplar!

  1. To lessen the danger of flame or electrical stun, don’t utilize a strong state speed control with this fan.
  2. To lessen the danger of individual damage, don’t twist the edge sections when introducing the sections, adjusting the cutting edges, or cleaning the fan. Try not to embed remote protests in the middle of the pivoting fan sharp edges.

Note: Be Careful and kept the instruction in your mind

  • READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING Establishment. Spare THESE INSTRUCTIONS
  • Utilize just Hunter new parts.
  • To lessen the danger of individual damage, append the fan specifically to the bolster structure of the working as indicated by these directions, what’s more, utilize just the equipment provided.
  • To keep away from conceivable electrical stun, before introducing your fan, detach the power by killing the circuit breakers to the outlet box and related divider switch area. In the event that you can’t bolt the circuit breakers in the off position, safely attach an unmistakable cautioning gadget, for example, a tag, to the administration board.
  • All wiring must be as per national and nearby electrical codes and ANSI/NFPA 70. In the event that you are new to wiring, utilize a qualified circuit repairman.
  • To lessen the danger of individual damage, don’t twist the cutting-edge connection framework when introducing, adjusting, or cleaning the fan.
  • Never embed outside articles between turning fan sharp edges.
  • To lessen the danger of flame, electrical stun, or engine harm, don’t utilize a strong state speed control with this fan. Utilize just Hunter speed controls.

Leave a Reply

Your email address will not be published. Required fields are marked *